Features   ● Electronic 3 stage impact power selection reduces fault tightening ● Hammer case securely fastened with four bolts ● Dual LED job light with preglow and afterglow functions ● Efficient impact system (Max 2,200 IPM) with less vibration ● Easy-to-operate, push button type F/R change switch   Specification   Fastening Capacities : Standard Bolt: M12 - M30 (1/2'' - 1-1/4'')                                      High Tensile Bolt: M10 - M24 (3/8'' - 1'') Square Drive : 19 mm (3/4'') Nut-Busting Torque : 1,700 N·m (1,250 ft.lbs.) Impacts Per Minute (IPM) : Hard: 0 - 2,200                                             Medium : 0 - 2,000                              Soft: 0 - 1,800 Max Fastening Torque : 1,050 N·m (780 ft.lbs.) No Load Speed (RPM) : Hard: 0 - 1,800                                         Medium: 0 - 1,000                                         Soft: 0 - 900 Dimensions (L x W x H) : 229 x 91 x 289 mm (9'' x 3-5/8'' x 11-3/8'') Net Weight : 3.4 - 3.7 kg (7.5 - 8.2 lbs.) Work Amount (approx.) : 185 pcs with BL1850B                                         Bolt M20 Standard equipment   Hook   Available options   RTJ: 1x Rapid Charger, 2x 5.0Ah Battery, 1x Makpac Connector Box RMJ: 1x Rapid Charger, 2x 4.0Ah Battery, 1x Makpac Connector Box RFJ: 1x Rapid Charger, 2x 3.0Ah Battery, 1x Makpac Connector Box Z: Without Charger & Battery read more

Features   ● Ergonomics: Comfortable handling thanks to a unique design, low weight and an ideal balance point ● Compactness: Due to combination of a brushless motor and the 12V System ● Cordless freedom: First professional cordless edge router leads to hassle-free working   Specification   No-load speed : 13,000 rpm Battery voltage '': 12.0 V Weight excl. battery : 1.1 kg   read more

Features ● Powerful cutting performance: Improved motor design to make tough cutting easier ● Long lifespan: Improved gearing system increases longevity ● Easy to carry: Reduced base size improves portability   Specification   Rated input power : 2,200 W Cutting disc diameter : 355 mm Cutting disc bore : 25.4 mm No-load speed : 3,800 rpm Cutting capacity at rectangle 0º : 100 x 196 mm Cutting capacity at square 0º : 119 x 119 mm Cutting capacity at L-profile 0º : 130 x 130 mm Weight : 15 kg Cutting capacity at rectangle 45º mitre : 107 x 115 mm Cutting capacity at square 45º mitre : 110 x 110 mm Cutting capacity at L-profile 45º mitre : 115 x 115 mm Tool dimensions (width x length x height) : 256 x 520 x 400 mm read more

● Handle part is a split type, and the anti-vibration rubber on the surface where your hand will touch serves to reduce fatigue. ● Wear resistant cover is placed on the switch lever and stopper areas to prevent entry of concrete and water. ● Most suited for casting of stone masonry, side ditch, building foundation and concrete products. read more

Features   ● Powerful 1,510 W motor to handle the most demanding applications; 1,450 BPM to tackle demanding jobs ● Adjustable large side handle improves operator comfort and control ● Lock-on button: easy to operate for both right and left handed users ● Auto lubrication ● Accepts 30 mm Hex shank   Specification   Continuous Rating Input : 1,510 W Impact Energy : EPTA-Procedure 05/2009: 21.7 J Impacts Per Minute (IPM) : 1,450 Dimensions (L x W x H) : 652 x 121 x 231 mm (25-3/4'' x 4-3/4'' x 9-1/8'') Net Weight : 15.1 kg (33.3 lbs.) Power Supply Cord : 5.0 m (16.4 ft)   Standard Equipment Bull Point, Wrench, Side Handle, Oil supply 100ml read more